Contact Us
Adding product to your cart
-
- Prepreg dry carbon fiber composition (lightweight solution, no fiberglass or plastic base)
- With pre-drilled holes for straightforward installation (see Installation Guide for details)
- One-piece front lip
-
Fits :
- BMW M3 Sedan (2021+) · G80 Chassis
- BMW M3 Competition Sedan (2021+) · G80 Chassis
- BMW M3 Competition xDrive Wagon · G81 Chassis
- BMW M3 Competition xDrive Sedan (2022+) · G80 Chassis
- BMW M4 Coupe (2021+) · G82 Chassis
- BMW M4 Competition Coupe (2021+) · G82 Chassis
- BMW M4 Competition xDrive Coupe (2022+) · G82 Chassis
- BMW M4 Competition Convertible (2022+) · G82 Chassis
- BMW M4 CSL Coupe (2023+) · G82 Chassis
For any questions regarding fitment, please contact our team at info@vescaa.com
-
Includes:
- Your new V style one-piece front lip
- The hardware needed for the installation -
Equipment needed for this installation:
- Trim tool kit
- 8mm socket
- 10mm socket
- Isopropyl alcohol or other equivalent safe alcohol-based solution
- Microfiber towel
- Screws for installation (supplied)
- 3M adhesive double-sided tape (supplied)
1. Use a soft pry tool to carefully remove the rivets located underneath the side black splitters.
2. Remove the M8 (8mm) or M10 (10mm) hex bolts along the front underside of the bumper.
3. Unscrew the upper part of the original black splitters; you may need to remove your wheel and fender liner to access this bolt.
4. Unclip the original side black splitters from the bumper and remove the small white holder from its outer edge.
5. Transfer the white holder from the original splitters to your new carbon fiber front lip.
6. Prepare the lower bumper and under surface by cleaning with an alcohol-based solution and a microfiber towel.
7. Place the front lip onto the bumper and conduct a test fit before securing it.
8. Use adhesive tape to carefully attach the lip to the bumper.
9. Secure the front lip in place by partially tightening the new screws.
10. Complete the installation by fully tightening all screws to securely affix the lip to the bumper.If you'd like to be featured on our website or social media pages, or if you'd simply like to give us feedback, please email us at info@vescaa.com
-
Yes, I am located in Canada.
Vescaa is proudly based in Canada, too. That means you will have no unexpected import charges when you shop for Vescaa branded items.
*Only applicable if you are shipping to a Canadian address.
Can I schedule a pickup?
If you are located in Montreal or the surrounding areas, please email us at info@vescaa.com, and we can arrange a pickup or local delivery for your convenience.
- Prepreg dry carbon fiber composition (lightweight solution, no fiberglass or plastic base)
- With pre-drilled holes for straightforward installation (see Installation Guide for details)
- One-piece front lip
Fits :
- BMW M3 Sedan (2021+) · G80 Chassis
- BMW M3 Competition Sedan (2021+) · G80 Chassis
- BMW M3 Competition xDrive Wagon · G81 Chassis
- BMW M3 Competition xDrive Sedan (2022+) · G80 Chassis
- BMW M4 Coupe (2021+) · G82 Chassis
- BMW M4 Competition Coupe (2021+) · G82 Chassis
- BMW M4 Competition xDrive Coupe (2022+) · G82 Chassis
- BMW M4 Competition Convertible (2022+) · G82 Chassis
- BMW M4 CSL Coupe (2023+) · G82 Chassis
For any questions regarding fitment, please contact our team at info@vescaa.com
Includes:
- Your new V style one-piece front lip
- The hardware needed for the installation
Equipment needed for this installation:
- Trim tool kit
- 8mm socket
- 10mm socket
- Isopropyl alcohol or other equivalent safe alcohol-based solution
- Microfiber towel
- Screws for installation (supplied)
- 3M adhesive double-sided tape (supplied)
1. Use a soft pry tool to carefully remove the rivets located underneath the side black splitters.
2. Remove the M8 (8mm) or M10 (10mm) hex bolts along the front underside of the bumper.
3. Unscrew the upper part of the original black splitters; you may need to remove your wheel and fender liner to access this bolt.
4. Unclip the original side black splitters from the bumper and remove the small white holder from its outer edge.
5. Transfer the white holder from the original splitters to your new carbon fiber front lip.
6. Prepare the lower bumper and under surface by cleaning with an alcohol-based solution and a microfiber towel.
7. Place the front lip onto the bumper and conduct a test fit before securing it.
8. Use adhesive tape to carefully attach the lip to the bumper.
9. Secure the front lip in place by partially tightening the new screws.
10. Complete the installation by fully tightening all screws to securely affix the lip to the bumper.
If you'd like to be featured on our website or social media pages, or if you'd simply like to give us feedback, please email us at info@vescaa.com
Yes, I am located in Canada.
Vescaa is proudly based in Canada, too. That means you will have no unexpected import charges when you shop for Vescaa branded items.
*Only applicable if you are shipping to a Canadian address.
Can I schedule a pickup?
If you are located in Montreal or the surrounding areas, please email us at info@vescaa.com, and we can arrange a pickup or local delivery for your convenience.
![](http://vescaa.com/cdn/shop/files/check-mark_2.png?v=1705888333&width=320)
Get early access to our premium products
Our Presale items are carefully curated, representing quality products of our brand, including our premium line. By participating in our Presale, you not only guarantee early access to exclusive products at special prices, but also become part of a community that values uniqueness and distinction.
Prepreg Carbon Fiber Vented Oil Cooler Guard for BMW G8X M2 M3 M4
Vescaa
Regular price
$810.00
$729.00
- Unit price
- /per
Carbon Fiber Seat Backs (Full Replacements) for BMW M3 M8 X3M X4M Comfort Seats
Vescaa
Regular price
$1,380.00
$1,188.00
- Unit price
- /per
PSM Style Rear Diffuser | Prepreg 4 Piece with Undertray for BMW F8X M3 M4
Vescaa
$1,786.00
- Unit price
- /per