Equipment needed for this installation:
- Jack with jack stand or equivalent method
- Ratchet
- Socket set
- U Clip Screws Speed Nuts
- Drill with twist drill bit
- Small finishing screws
- 3M adhesive double-sided tape
- Isopropyl alcohol or other equivalent safe alcohol-based solution
- Microfiber towel
1. Remove all screws and bolts from under the bumper. Make sure to also remove the bolts aligned with the undertray mounting points. This will have to be completed before step 4.
2. Carefully detach and remove the factory diffuser from your vehicle.
3. Insert the rear diffuser piece (from the 4 piece set) into place, ensuring it is properly positioned and the top clips are clipped in.
Secure it with your OEM hardware.
4. First, dry fit the undertray panel and make sure all the bolts that align with the mounting points were removed (if applicable).
5. Install U Clip screws on the OEM plastic tray under the car where the mounting points align.
6. Align the undertray and place a soft-surfaced object underneath to support the panel for the rest of the installation.
7. Install the screws connecting the undertray to the U Clips on the plastic tray under the car.
8. Drill small holes where the undertray mounts on the rear diffuser (recessed area on the rear diffuser).
This is the only place where you will need to drill holes. Use the existing holes on the undertray to guide
you.
9. Using the small screws provided, attach the undertray to the rear diffuser.
10. Tighten all screws, making sure the undertray is properly fastened.
11. Install double sided tape on the long edge of the splitters. Remove the tape protector film and attach the side rear splitters in place.
12. Secure with long screws.
You’re all done. Enjoy the nice view and the new look!
If you'd like to be featured on our website or social media pages, or if you'd simply like to give us feedback, please email us at info@vescaa.com
